Robin America RGV4100 Service Manual page 50

10-3-3 STATOR
(1) Put the stator in the rear cover setting the four
grooves on the side of stator with thread holes
of the rear cover.
(2) Attach the stator cover around the stator.
10-3-4 REAR COVER
(1) Put the rear cover with stator over the rotor.
Tap on the rear cover evenly with a plastic
hammer to press the rotor bearing into the rear
cover.
(2) Fix the rear cover to the adaptor with four bolts,
spring washers, and washers.
RGV6100
M6 x 160 mm bolt . . . 4 pcs.
M6 spring washer . . . 4 pcs.
M6 washer . . . 4 pcs.
RGV2800 and 4100
M6 x 110 mm bolt . . . 4 pcs.
M6 spring washer . . . 4 pcs.
(3) Attach the bushing over the lead wire drawn
out from the rear cover. Press the smaller end
of the bushing into the window of the rear
cover.
T g i h e t n n i g o t q r u e
4 5 . - 5 9 . N - m
5 0 - 6 0 k g c - m
3 6 . - 4 3 . - t f b l
T g i h e t n n i g o t q r u e
4 5 . - 5 9 . N - m
5 0 - 6 0 k g c - m
3 6 . - 4 3 . - t f b l
- 47 -
STATOR
Fig. 10-23
Fig. 10-24
Fig. 10-25
STATOR COVER
REAR COVER