Comcast CGA4332COM Manual page 51

CBR2 CGA4332COM- User Guide
reconfiguration of your Gateway or a restore of a previously saved configuration (see
previously saved
as described in "5.1 Connect your wireless devices".
Methods
You can choose between:
Performing a reset (restart)/restore via the Admin

With this method, you can choose to only reset (restart) or restore a specific module of the Gateway or
perform a complete reset/restore of the Gateway.
Reset/restore the Gateway via the Reset button

With this method, you can only perform a complete reset (restart) or restore of the Gateway.
Performing a reset (restart)/restore via the Admin Tool
Proceed as follows:
1. Go to the Admin Tool (http://10.1.10.1), using a computer or device that is currently connected to your
Gateway (either wired or wirelessly). For more information, see
2. On the Troubleshooting menu, click Reset/Reboot Gateway.
3. The Reset/Reboot Gateway page appears. Click:
RESET to restart the Gateway.

RESET WIFI MODULE to restart just the wireless module only.

RESET WIFI ROUTER to restart the wireless and router modules.

RESTORE WIFI SETTINGS to activate the Gateway default settings for wireless only. All changes

to the default wireless settings will be undone.
RESTORE FACTORY SETTINGS to activate all Gateway default settings. All changes to the

default settings will be undone.
4. The Gateway prompts you to confirm your choice. Click OK.
5. If you selected Restore Factory Settings, the Gateway will restart. In all other cases, no restart is
needed.
Reset/restore the Gateway via the Reset button
Proceed as follows:
1. Make sure that the Gateway is turned on.
2. If you want to:
Reset the Gateway, use a pen or an unfolded paperclip to push the recessed Reset button on the

front panel of the Gateway for approximately 5 seconds and then release it.
Restore the factory default settings of the Gateway, use a pen or an unfolded paperclip to push the

recessed Reset button on the front panel of the Gateway for at least 15 seconds and then release
it.
3. Restart the Gateway.
configuration") will be needed. Also, your wireless clients will have to be re-associated,
Tool.
"Accessing the Admin
"Restoring a
Tool".
Reset Button
51 of 51