Comcast CGA4332COM Manual page 31

CBR2 CGA4332COM- User Guide
The following fields are available for configuration:
Wireless Network: Allows you to enable or disable this access point.
Network Name (SSID): To distinguish one wireless network from another, each wireless network has its own network
name, often referred to as Service Set Identifier (SSID). All your wireless clients on your network must use this network
name. Note: By default, the 2.4 GHz and 5 GHz APs have the same Network Name (SSID). This is also the
recommended configuration so that dual-mode clients can easily attach to the best AP best on rate and distance from the
AP.
Mode: The standards that are allowed for wireless communication. Only devices that support one of the selected modes
can connect to the Gateway.
Security Mode: The encryption type used to secure your wireless communication. We recommend using the default
encryption, WPAWPA2-PSK (TKIP/AES), as it is compatible with most of the Wi-Fi devices and offers an excellent level
of security. Note: Open and WEP are to be avoided because they have security flaws and should not be used in normal
conditions.
Channel Selection: The default setting is Automatic; the Gateway automatically selects the best channel for your
wireless communication. We recommend that you not change this setting.
Channel: The channel that is currently used for your wireless communication.
Channel bandwidth: Allows you to select the channel bandwidth from the available option.
Network Password: The wireless network key that is used for encrypting your wireless communication.
Show Network Password: When you select the Show Network Password check box, the text in the Network
Password will no longer be masked.
31 of 51