View And Record Video - Axis P14-LE Series User Manual

AXIS P14-LE Bullet Camera Series
Configure your device
2. Go to Settings > PTZ > Limits and set the limits as needed.
Create a guard tour with preset positions
A guard tour displays the video stream from different preset positions either in a predetermined or random order, and for configurable
periods of time.
1. Go to PTZ > legacy device interface.
2. In the legacy device interface, go to PTZ > Guard tours.
3. Click +.
4. To edit the guard tour's properties, click
5. Type a name for the guard tour and specify the pause length in minutes between each tour.
6. If you want the guard tour to go to the preset positions in a random order, turn on Shuffle.
7. Click Done.
8. Click Add to add the preset positions that you want in your guard tour.
9. Click Done to exit the guard tour settings.
10. To schedule the guard tour, go to System > Events.

View and record video

This section includes instructions about configuring your device. To learn more about how streaming and storage works, go to
Streaming and storage on page 50.
Reduce bandwidth and storage
Important
Reducing the bandwidth can result in loss of details in the image.
1. Go to Video > Stream.
2. Click
3. Select Video format H.264.
4. Go to Video > Stream > General and increase Compression.
5. Go to Video > Stream > H.264 and H.265 encoding and do one or more of the following:
- Select the Zipstream level that you want to use.
Note
The Zipstream settings are used for both H.264 and H.265.
- Turn on Dynamic FPS.
- Turn on Dynamic GOP and set a high Upper limit GOP length value.
Note
Most web browsers don't support H.265 decoding and because of this the device doesn't support it in its web interface.
Instead you can use a video management system or application that supports H.265 decoding.
in the live view.
.
11