View And Record Video - Axis Q6074-E PTZ User Manual

AXIS Q60-E Series
Setup
Create a guard tour with preset positions
A guard tour displays the video stream from different preset positions either in a predetermined or random order, and for configurable
periods of time.
1. Go to Settings > PTZ > Guard tours.
2. Click +.
3. Select Preset position.
4. To edit the guard tour's properties, click
5. Type a name for the guard tour and specify the pause length in minutes between each tour.
6. If you want the guard tour to go to the preset positions in a random order, turn on Shuffle.
7. Click Done.
8. Click Add to add the preset positions that you want in your guard tour.
9. Click Done to exit the guard tour settings.
10. To schedule the guard tour, go to System > Events.

View and record video

To learn more about settings for viewing and recording video, see Streaming and storage on page 16.
Reduce bandwidth and storage
Important
If you reduce the bandwidth it can result in loss of details in the picture.
1. Go to live view and select H.264.
2. Go to Settings > Stream.
3. Do one or more of the following:
- Turn on the Zipstream functionality and select the desired level.
Note
The zipstream settings are used for both H.264 and H.265.
- Turn on dynamic GOP and set a high GOP length value.
- Increase the compression.
- Turn on dynamic FPS.
Note
Web browsers do not support H.265 decoding. Use a video management system or application supporting H.265 decoding.
Set up network storage
To store recordings on the network, you need to set up network storage:
1. Go to Settings > System > Storage.
2. Click Setup under Network storage.
.
10