Table of Contents
Advertisement
AXIS P14-LE Bullet Camera Series
Configure your device
3. Go to
4. Adjust the intensity.
Benefit from IR light in low-light conditions by using night mode
Your camera uses visible light to deliver color images during the day. But as the visible light diminishes, color images become less
bright and clear. If you switch to night mode when this happens, the camera uses both visible and near-infrared light to deliver bright
and detailed black-and-white images instead. You can set the camera to switch to night mode automatically.
1. Go to Video > Image > Day-night mode, and make sure that the IR-cut filter is set to Auto.
2. To set at what light level you want the camera to switch to night mode, move the Threshold slider toward Bright or Dark.
3. To use the built-in IR light when the camera is in night mode, turn on Allow IR illumination and Synchronize IR
illumination.
Reduce noise in low-light conditions
To reduce noise in low-light conditions, you can adjust one or more of the following settings:
•
Adjust the trade-off between noise and motion blur. Go to Video > Image > Exposure and move the Blur-noise trade-off
slider toward Low noise.
•
Set the exposure mode to automatic.
Note
A high max shutter value can result in motion blur.
•
To slow down the shutter speed, set max shutter to the highest possible value.
Note
When you reduce the max gain, the image can become darker.
•
Set the max gain to a lower value.
•
Open the aperture.
•
Reduce sharpness in the image, under Appearance.
Handle scenes with strong backlight
Dynamic range is the difference in light levels in an image. In some cases the difference between the darkest and the brightest
areas can be significant. The result is often an image where either the dark or the bright areas are visible. Wide dynamic range
(WDR) makes both dark and bright areas of the image visible.
and select Manual.
Image without WDR.
7
Advertisement
Table of Contents
