Manual/Automatic Functions; Manual Function; Automatic Function - Rointe ecodeisgn SYGMA SRI0330RAD2 Installation And User Manual

5.6. MANUAL/AUTOMATIC FUNCTIONS

Press the button to switch between the Manual and Automatic functions. The main
display will show the symbol

manual function.

MANUAL
This function allows you to switch between
COMFORT, ECO and ANTI-FROST modes by
changing the temperature.
5.6.1. MANUAL FUNCTION
This function allows you to vary the temperature by switching the product modes between
COMFORT, ECO and ANTI-FROST. To set the temperature in MANUAL mode see point 5.3. of
this manual. The icons for COMFORT, ECO and anti-freeze will appear when the temperature
changes to the above ranges. Depending on the selected temperature, you will see one of
these symbols on the display:
CONFORT
From 19ºC to 30ºC

5.6.2. AUTOMATIC FUNCTION

To start programming, check that it is in the Automatic function, with the display showing
the symbol , press
and hold for 3 seconds to enter programming mode.
STEP 1 - Select the COMFORT mode temperature
The CONFORT mode
between 19ºC and 30ºC with the
flash; press the
STEP 2 - Select the ECO mode temperature
The ECO mode
temperature within the range between 7.5ºC and 18.5ºC. The
will start flashing; once you are satisfied with the selection, press
for the AUTOMATIC function and the
From 7.5ºC to 18.5ºC
to chenge the function. Once in Automatic function, press
will be programmed first. Select the COMFORT mode temperature
and
icon to confirm.
will be programmed later. Use the
SYGMA DIGITAL RADIATOR
AUTOMATIC
This function activates the programming stored
in the product.
ECO
buttons. The icon and temperature will
and
symbol for the
ANTI-FROST
7ºC
burtton to vary the
icon and the temperature
to confirm.
EN
15