Basic Functions And Operation - Channel Vision SIM Series Quick Start Manual

Basic Functions
Video intercom with indoor monitor & management center.
●
ID card reader. Supports a maximum of 10,000 cards.
●
Access password unlocking.
●
Supports standard SIP protocol to communicate with IP phones and SIP software.
●
Phone book search and direct dial.
●
Basic Operation
- Calling indoor monitor
Input floor and room number (at least 3 digits), then press # to confirm. If you do not press
●
pound the unit will automatically call after 2 seconds.
You can also make a call by searching through the phone book. To search the phone book
●
press the up or down
person you want to call.
If the indoor monitor you are trying to reach is unavailable, the outdoor panel will display
●
"Busy", then auto return to standby mode.
Press the "*" button to end communication at any time during the call.
●
-Calling management center
Dial "0000" then press # to call the management center.
●
If the management center is busy or unavailable, the outdoor panel will display "Busy", then
●
auto return to standby mode.
Press the "*" button to end communication at any time during the call.
●
-Unlocking the door
1. Unlocking by access password
Press the # key, enter the access password (default is 000), then press the # key to confirm.
●
2. Unlocking by IC/ID card.
Hold the IC/ID card up against the card reader area of the SIM intercom.
●
Call guard/management
call a room direct
ex. = 1111#
Unlock door from key pad
ex. = #123456#
Search directory
arrow on the keypad, then press # once you have found the
Front Display
Instruction
Center : 0000 + #
Call : RoomNo + #
Unlock : # + PSW + #
Name : ▲ or ▼
7