Sony COM-2 Operating Instructions Manual page 176

1
1
Troubleshooting
Symptom
The computer freezes
when the power is turned
on after connecting the
unit. The computer displays
"boot from CD" on the
screen.
Others
Symptom
HOME button does not
work.
The unit does not function
properly.
The unit or AC adapter is
warm.
The unit is turned on, but
does not operate.
The keyboard does not
work.
Cause or corrective action
 Be sure to connect the unit after turning on the power
of the computer.
Cause or corrective action
 A dialog window is displayed. Close the dialog window
by selecting "OK, " "Cancel, " "Close, " etc.
 Static electricity and other similar occurrences may
affect the operation of the unit. Remove the battery pack
and AC adapter, wait for a few minutes. Then turn on
again.
 Press the RESET button using the stylus to reboot the
unit (  page 15).
 During use, the unit or AC adapter may become warm.
This is not a malfunction. If you find the AC adapter
gets extremely warm, stop using the unit, and unplug
the AC adapter from the power source.
 None of the buttons or controls work while the start-up
screen is displayed.
 Check that the POWER/HOLD switch is not set to
"HOLD" (  page 15).
 Try sliding the POWER/HOLD switch and holding
until the POWER indicator turns off. The unit will be
completely turned off. Then turn on the unit again.
 Press the RESET button using the stylus to reboot the
unit (  page 15).
 Remove the battery and remove the AC cord or USB
cable. Wait a few minutes, insert the battery, and then
plug the AC cord in before turning on the unit again.
 Check that the POWER/HOLD switch is not set to
"HOLD" (  page 15).
 Check that the modifier keys (the Fn key, the Num key,
the Sym key and the Shift key) are not locked (  page
20).
Table of
Contents
mylo
Widget
Web
RSS/
Podcast
AIM
Skype
Yahoo!
Messenger
Google
Talk
Music
Photo
Video
Camera
Tools
Index
Continued 




