Sony COM-2 Operating Instructions Manual page 11

11
11
Power
Turning On the Power - POWER/HOLD Switch
Make sure that the battery is charged first. For how to connect the unit, refer to
 page 9.

Slide and hold the POWER/HOLD switch toward the direction of the
arrow.
The unit turns on, and the POWER indicator lights up green.
When you turn on the unit for the first time, the initial set-up wizard
appears after about 1.5 minutes. Follow the instructions on the display to
set-up.
Normally, the last screen viewed is restored whenever the power is turned
back on.
To turn off the unit
Slide and hold the POWER/HOLD switch toward the direction of the arrow.
The POWER indicator goes out.
Notes
Do not remove the battery or disconnect the AC adapter while the start-up screen is

displayed.
If it has been more than 8 days since the last time the unit was used, the Home menu is

displayed about 1.5 minutes after the start-up screen appears.
While the start-up screen is being displayed, you cannot turn off the unit.

If the power is turned on or off in a way other than stated above (for example, taking out the

battery or pressing the RESET button), some data stored may be damaged or erased. Be sure
to turn on and off the power using the POWER/HOLD switch.

Hints
This unit automatically turns itself off (Auto Power Off) in 5 minutes (default setting) from

the last operation, unless it is playing back music or video, or while the AC adapter is
connected. To clear the setting or change the value, see  page 152.
About the initial set-up wizard, see  page 27.

POWER/HOLD switch POWER indicator
Table of
Contents
mylo

Widget
Web
RSS/
Podcast
AIM

Skype

Yahoo!

Messenger
Google
Talk

Music
Photo
Video
Camera
Tools
Index