Sony COM-2 Operating Instructions Manual page 149

1
1
Tools
··· Network Settings
Item/Button
Scan
New
Close
To set a wireless network, there are 3 methods.

To set "Unknown" on the screen as a registered wireless network, tap it, and
the Network Settings screen appears. Input necessary information.
Note
When you select a wireless network, the unit applies WEP/WPA setting of the wireless

network automatically. But only when the wireless network is WEP (Shared Key), the unit
cannot discriminate the type. Change the setting manually in this case.

To change settings for a wireless network, highlight the Display Name using
the Operation key, and then select "Edit" from the OPTION menu.
After that, set the following options, and tap "Save. "
Notes
If you tap the registered wireless network, the unit only switches the connection to it. Use

the Operation key to select an item to change.
When the setting of the WEP/WPA is "Do Not Use, " the Network Settings screen will not

be displayed. The unit starts connecting to the network immediately.

To set a wireless network that is not listed on the screen, select "New" and
input necessary information.
To change settings for a wireless network, highlight the Display Name, and then
select "Edit" from the OPTION menu.
After that, set the following options.
Item
Display Name
SSID
WEP/WPA
Setting options/Operations
Searches for available wireless networks.
For create a new wireless setting.
Closes the Connection Manager screen.
Options
Changes the name on the wireless network list.
Changes the unique identifier for a wireless network.
You can select the security method from the following :
<Do Not Use/WEP/WEP (Shared Key)/WPA-PSK (TKIP)/
WPA-PSK (AES)>
Table of
Contents
mylo
Widget
Web
RSS/
Podcast
AIM
Skype
Yahoo!
Messenger
Google
Talk
Music
Photo
Video
Camera
Tools
Index
Continued 




