Technical Data - Raider RD-AS01 User Manual

8 www.raider.bg
EN
Congratulations on buying a machine from the fastest growing brand for electric, gasoline and
pneumatic machines - RAIDER. With proper installation and operation, RAIDER are reliable and reliable
machines, and the work with them will bring you real pleasure. For your convenience, there is an
excellent service network with 45 service stations all over the country.
Before using this machine, please read this "Instruction for Use" carefully.
For the sake of your safety and to ensure proper use, read these instructions carefully, including the
recommendations and warnings therein. To avoid unnecessary errors and incidents, it is important that
these instructions remain available for future reference to anyone who will use the machine. If you sell
it to a new owner, the "Instruction for Use" must be handed over to the new owner so that the new user
can read the relevant safety precautions and operating instructions.
"Euromaster Import Export" Ltd is an authorized representative of the manufacturer and owner of
the trademark RAIDER. The address of the company's management is in Sofia 1231, 244 Lomsko
Shosse Blvd., tel. 02934 33 33, 934 10 10, www.raider.bg; www.euromasterbg.com; e-mail: info @
euromasterbg.com.
Since 2006 the company has introduced the ISO 9001: 2008 quality management system with scope
of certification: Trade, import, export and servicing of professional and hobby electric, pneumatic and
mechanical tools and general hardware. The certificate is issued by Moody International Certification
Ltd, England
parameter
Model
Max. Pressure:
Bracket length:
Work Pressure:
Nozzle:
1. Always wear safety goggles or glasses.
2. Always ensure machine is switched off before connecting to air supply.
3. Disconnect any machine from the air supply before changing blades or discs, and before servicing any
type of machine.
4. Always keep your air tool clean and lubricated. Daily lubrication is essential to avoid internal corrosion
and possible failure.
5. Do not wear watches, rings bracelets or loose clothing when using air tools.
6. Using only light weight coil hoses from a tool to the wall or compressor coupling. Do not fit quick change
couplings onto the machine as vibration can cause the coupling to fail.
7. Do not overload the machine. Allow the tool to operate at its optimum speed for maximum efficiency.
8. Do not increase the air pressure above the manufacturers recommended level, as excessive overload
can cause the machine casing to split. Also this creates excessive wear on moving parts and possible failure.
9. In the interests of safety and possible damage to the machine/operator, always ensure that the machine
has stopped before putting it down after use.
10. Always ensure that the work piece is firmly secured leaving both hands free to control the machine.
11. Always ensure that the accessories such as blades, discs, sockets, etc. are rated/designed for use
with the machine. Also correctly and securely fastened before connecting the machine to the air supply.
Air Supply
1. Make sure that the air valve (or trigger) is in the "off" position before submitting air.
Original Instruction for Use
Dear Users,

TECHNICAL DATA

Important Safety Rules
unit value
- RD-AS01
bar 7
mm 6-16; 12.8х1
bar 4-7
inch 1/4"