Changing The Abs Fuses - Husqvarna Vitpilen 401 EU 2022 Owner's Manual

15 ELECTRICAL SYSTEM
15.5
94
F02697-10
F02696-10

Changing the ABS fuses

Info
Two fuses for the ABS are located under the protection cap next to the fuse box. These fuses protect
the return pump and the hydraulic unit of the ABS. The third fuse, which protects the ABS control unit, is
located in the fuse box.
F03803-10
–
Remove faulty main fuse
Info
A faulty fuse has a burned-out fuse wire
A spare fuse is located in the fuse box.
–
Insert a new main fuse.
Fuse (75011088030) (
Tip
Put a spare fuse in the fuse box so that it is available if
needed.
–
1
Mount protection cap
Finishing work
–
Mount the seat. ( p. 55)
–
Set the clock. ( p. 34)
Preparatory work
–
Remove the seat. ( p. 55)
To change the fuse of the ABS hydraulic unit:
–
Take off the protection cap and remove fuse
Info
You can recognize a faulty fuse by a burned-out
A
fuse wire .
Warning
Fire hazard Incorrect fuses overload the electri-
cal system.
–
Only use fuses with the required ampere
value.
–
Do not bypass or repair fuses.
–
Insert the spare fuse with the correct rating.
2
.
A
.
p. 122)
.
1
.