7.3
Warnings
Info
All existing warnings are displayed on the Info display
until these are no longer active.
As soon as a malfunction occurs, the relevant indicator
lamps light up to signal that an indication/warning note for
the operating safety has been detected.
As soon as several warnings have been detected, the
general warning symbol also flashes on the display.
If a malfunction has occurred in the CAN bus, various warnings
appear on the display:
CAN FAILURE, CAN ABS FAILURE, and CAN EMS FAILURE
can appear.
ABS Failure appears on the display if the ABS is no longer
active.
H03972-01
Quick Shifter Failure appears on the display if the Easy Shift is
faulty.
ECU Failure appears on the display if the engine control unit
reports a malfunction.
H03975-01
Transport Lock appears on the display if transport mode is acti-
vated.
Temporary Transport Lock appears on the display if temporary
transport mode is activated.
H03970-01
Kill Switch appears on the display if the emergency off switch is
pressed.
SideStand Down appears on the display if the side stand is
folded down.
H03971-01
COMBINATION INSTRUMENT 7
23