Lifting The Motorcycle With The Front Lifting Gear - Husqvarna Vitpilen 401 EU 2022 Owner's Manual

12.3

Lifting the motorcycle with the front lifting gear

Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
SERVICE WORK ON THE CHASSIS 12
Condition
Rear wheel was not removed.
–
Secure the motorcycle against falling over.
–
Remove the rear lifting gear and lean the vehicle on side
1
stand
–
Remove bushings kit.
Info
Do not ride with the bushings mounted, as the
402029-10
bushings can collide with the main silencer.
–
Mount and tighten screw
Guideline
Screw, license
plate bracket
F02668-11
Condition
Rear wheel was removed.
–
Secure the motorcycle against falling over.
–
Remove the rear lifting gear and lean the vehicle on side
1
stand
–
Remove bushings kit.
Info
Do not ride with the bushings mounted, as the
402029-10
bushings can collide with the main silencer.
–
Install the license plate bracket. (
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
Main work
–
Remove protection cap
F02669-10
.
2
.
M10x30 30 Nm (22.1 lbf ft)
.
p. 61)
1
.
®
Loctite 243™
p. 52)
53