Certificate; Figure 3.36 Certificate Page; Table 3.25 Certificate Configuration Options - RLE Technologies WiNG-MGR v2 User Manual

3
Web Interface
3.8.8

Certificate

The WiNG-MGR has a default HTTPS certificate pre-installed. It will use this certificate for
HTTPS communications, but it is strongly recommended that you configure your own
certificate and private key to ensure secure communications.
Once your own certificate and private key have been configured, the unit can be rebooted
using the red button in the System Information menu to apply the changes.
Figure 3.36
Option
HTTPS Certificate and Key Settings- This section allows you to activate HTTPS for the
WiNG-MGR. You will need an HTTPS certificate and key to do this. Contact your IT
department for more information about your HTTPS certificate and key.
Loaded Certificate
Loaded Key Info
Certificate in Use
Upload Certificate
Upload Key
Delete Certificate
and Key Data
Table 3.25
68
Certificate Page
Description
This section provides details about the certificate currently loaded
into the WiNG-MGR.
This section provides details about the data key currently loaded
into the WiNG-MGR.
If a certificate is in use, it will be indicated here.
If you see the !!Reboot!! message, a certificate and key have been
uploaded, but the WiNG-MGR needs to be rebooted in order for
HTTPS to be activated.
Use this field to upload the HTTPS certificate.
Use this field to upload the HTTPS key.
Click this button to delete the uploaded certificate and key from the
WiNG-MGR.
Certificate Configuration Options
WiNG-MGR v2 User Guide 800.518.1519