STEP 3: Console Covers & Cross Brace
1.
Attach the bottom console covers (52 & 53) to the console with five Sheet Metal Screws (105) on each side.
Tighten with the Phillips Head Screw Driver (109) or Combination M5 Allen Wrench & Phillips Head Screw
Driver (107).
Attach the cross brace (3) to the console mast tubes (4 & 5) with two Button Head Socket Bolts (102) on
2.
each side. Tighten with the M6 Allen Wrench (106).
3.
Firmly tighten the eight Button Head Socket Bolts inserted in Step 1 with the M6 Allen Wrench (106). Place the
accessory holder tray (48) securely on top of the cross brace (3).
HARDWARE
#102. 5/16" x 15mm
Button Head Socket
Bolt (4 pcs)
#105. 3.5 x 12mm
Sheet Metal Screw
(10 pcs)
9
XT685
T readmill