Spirit XT685 Owner's Manual page 12

STEP 2: Console
1. Connect the following cables together: Incline cables (35) to (39), Speed cables (34) to (38), and Computer
cables (33) to (31).
2. Place the console (37) onto the brackets at the top of the console mast tubes and attach with two Button
Head Bolts (104) and two Split Washers (108) on each side. Caution: Be careful not to pinch any of the cables.
Doing so may affect the console function. Firmly tighten with the Combination M5 Allen Wrench & Phillips Head
Screw Driver (107).
HARDWARE
#108. 3/8" x 2.0T
Split Washer (4 pcs)
XT685
T readmill
#104. 3/8" x 1-3/4"
Button Head Socket
Bolt (4 pcs)
8