Soundstream HUMAN REIGN HR 2 Owner's Manual page 13

POWER AND GROUND
To ensure maximum output from your Human Reign amplifier, use high quality,
low-loss power and ground cables and connections. The Human Reign
amplifiers will accept up to 2 gauge power and ground cables. Determine from
the chart below the minimum gauge power and ground wire for your application.
HR 2
HR 4
EXTERNAL
Like all audio components, the Human Reign amplifier must be fused near the
battery. A fuse or circuit breaker must be located within 18" of the battery. This
will prevent a fire in the event of a shorted cable. See the chart below to
determine the correct fuse value.
INTERNAL
The Human Reign amplifiers are fused with an automotive-type or Maxi-fuse. In
the event of a blown power supply fuse(s), replace with the correct value fuse
found in the chart below. Never replace the fuse with a higher value than what
is supplied. This may result in amplifier damage and will void the warranty!
HR 2
HR 4
up to 10´
2 or 4 gauge
2 or 4 gauge
CIRCUIT BREAKERS AND FUSES
Human Reign Amplifier Fuse Values
WIRING
Battery Fuse / Circuit Breaker
200 amp
140 amp
13
up to 20´
2 gauge only
2 gauge only