evertz 7780ASIB2-DS3/E3 Manual

2 channel asi + ethernet ds3/e3 transceiver
Table of Contents

Advertisement

Quick Links

1.
OVERVIEW........................................................................................................................................1
2.
INSTALLATION.................................................................................................................................3
3.
SPECIFICATIONS.............................................................................................................................5
3.1.
SERIAL VIDEO INPUT ..........................................................................................................5
3.2.
SERIAL VIDEO OUTPUTS....................................................................................................5
3.3.
LINK OUTPUT .......................................................................................................................5
3.4.
LINK INPUT ...........................................................................................................................5
3.5.
ELECTRICAL ........................................................................................................................5
3.6.
PHYSICAL .............................................................................................................................6
3.7.
COMPLIANCE .......................................................................................................................6
4.
STATUS INDICATORS AND DISPLAYS..........................................................................................7
4.1.
STATUS INDICATOR LEDS .................................................................................................7
4.2.
CARD EDGE DISPLAY .........................................................................................................8
4.2.1. Control Menu............................................................................................................11
4.2.1.1.
4.2.1.2.
4.2.1.3.
4.2.1.4.
4.2.1.5.
4.2.2. STAT Menu ..............................................................................................................13
4.2.2.1.
4.2.2.2.
4.2.2.3.
4.2.2.4.
4.2.2.5.
4.2.2.6.
4.2.2.7.
4.2.2.8.
4.2.2.9.
4.2.2.10. Displaying the Last Interval Counter ........................................................17
4.2.2.11. Displaying Firmware Version ...................................................................17
5.
7780ASIB2-DS3/E3 CARD CONFIGURATION ..............................................................................18
5.1.
GENERAL............................................................................................................................18
5.1.1. Control......................................................................................................................18
5.1.2. Ethernet Control .......................................................................................................18
5.1.3. Monitor .....................................................................................................................18
5.1.4. Ethernet Monitor.......................................................................................................18
5.2.
ERRORED SECOND CONTROL ........................................................................................19
5.3.
ERRORED SECOND STATUS............................................................................................20
5.4.
ASI BANDWIDTH MONITOR ..............................................................................................21
5.5.
ASI INPUT 1 ........................................................................................................................21
7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver

TABLE OF CONTENTS

Passcode Protection Configuration..........................................................11
Input ASI & Output ASI Error Reset.........................................................12
Setting the Output Mode ..........................................................................13
Clearing the Counters ..............................................................................13
Displaying Input ASI Status Information ..................................................14
Displaying the Total Input ASI Bandwidth Used ......................................14
Displaying Output ASI Status Information................................................14
Displaying the Output ASI Bandwidth Used.............................................15
Displaying the TDMD Data Errors............................................................15
Displaying the Ethernet Status.................................................................15
Displaying the Ethernet Speed ................................................................15
Displaying the Ethernet Bandwidth ..........................................................16
Displaying the Current Interval Counter...................................................16
Revision 2.0
7700 MultiFrame Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 7780ASIB2-DS3/E3 and is the answer not in the manual?

Questions and answers

Summary of Contents for evertz 7780ASIB2-DS3/E3

  • Page 1: Table Of Contents

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver TABLE OF CONTENTS OVERVIEW............................1 INSTALLATION..........................3 SPECIFICATIONS..........................5 3.1. SERIAL VIDEO INPUT ......................5 3.2. SERIAL VIDEO OUTPUTS....................5 3.3. LINK OUTPUT ........................5 3.4. LINK INPUT ...........................5 3.5. ELECTRICAL ........................5 3.6. PHYSICAL ..........................6 3.7.
  • Page 2 7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 5.5.1. Control ........................22 5.5.2. Monitor ........................22 5.6. ASI OUTPUT 1 ........................22 5.6.1. Control ........................22 5.6.2. Monitor ........................22 5.7. ASI FAULTS ........................23 5.8. FAULTS ..........................24 JUMPERS............................25 6.1. SELECTING WHETHER LOCAL FAULTS WILL BE MONITORED BY THE GLOBAL FRAME STATUS..................25...
  • Page 3 June 2010 Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied.
  • Page 4 7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver This page left intentionally blank Revision 2.0...
  • Page 5: Overview

    Monitoring and control of card status and parameters are provided locally at the card edge or remotely via VistaLINK ® The 7780ASIB2-DS3/E3 occupies two card slots in the 3 RU frame, which will hold up to 7 modules, or three modules in a 1RU frame. Features: •...
  • Page 6: Figure 1-1: 7780Asib2-Ds3/E3 Block Diagram

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver Input Stage DS3/E3 Output Stage DS3/E3 OUTPUT 2 ASI INPUT Input Stage FBM Technology 10/100 ETHERNET RJ45 Output Stage DS3/E3 2 ASI OUTPUTS SDH TDM Input Stage DS3/E3 INPUT...
  • Page 7: Installation

    7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver INSTALLATION The 7780ASIB2-DS3/E3 comes with a companion rear plate that has six BNC connectors, and two RJ45 connector. For information on mounting the rear plate and inserting the module into the frame see section 3 of the 7700FR chapter.
  • Page 8 7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver LINK OUTPUT: Isolated output BNC for DS3/E3 (44.736Mbps) output signal. ETHERNET PORT: RJ45 Ethernet port for transport and receive of 10/100 Base T Ethernet signal with a max bandwidth of 25Mbps. Total system bandwidth may not exceed 40Mbps.
  • Page 9: Specifications

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver SPECIFICATIONS 3.1. SERIAL VIDEO INPUT Standards: DVB-ASI Number of Inputs: 2 independent DVB-ASI signals with combined total system bandwidth of 40Mb/s Connector: BNC per IEC 61169-8 Annex A Equalization:...
  • Page 10: Physical

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 3.6. PHYSICAL Number of Slots: 3.7. COMPLIANCE Electrical Safety: CSA Listed to CSA C22.2 No. 60065-03, UL 60065-03 IEC 60065-(2001-12) 7th Edition Complies with CE Low voltage directive 93/68/EEC Laser Safety: Complies with 24 CFR 1040.10 and 1040.11 except for deviations...
  • Page 11: Status Indicators And Displays

    STATUS INDICATORS AND DISPLAYS The 7780ASIB2-DS3/E3 has 4 LED Status indicators and a 4 digit alphanumeric display on the front card edge to show operational status of the card at a glance. The card edge pushbutton and toggle switch are used to select various displays on the alphanumeric display.
  • Page 12: Card Edge Display

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 4.2. CARD EDGE DISPLAY Additional signal and status monitoring is provided via the 4-digit dot-matrix display located at the card- edge. The card edge toggle switch is used to select whether you are displaying status from the card (monitoring mode) or setting control parameters for the card (control mode).
  • Page 13 7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver BACK BACK BACK BACK HORZ DISP VERT BACK BACK RATE NULL ASI1 DATA CCER IASI BACK RATE NULL ASI2 DATA CCER BACK IPBW USED BACK BACK STAT RATE NULL...
  • Page 14: Figure 4-2: Card Edge Menu

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver BACK BACK LINK DOWN BACK DOWN BACK 0-25 BACK BACK BACK TIME LOSS IDLE BACK TIME LOSS IDLE BACK BACK LOSS IDLE BACK LOSS IDLE Figure 4-2: Card Edge Menu Page - 10 Revision 2.0...
  • Page 15: Control Menu

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 4.2.1. Control Menu The Control menu enables the user to control and set different parameters on 7780ASIB2-DS3/E3 cards. 4.2.1.1. Passcode Protection Configuration The channels’ passcode protection can be controlled using menu selections. To configure the channel passcode protection from the CTRL menu, use the toggle switch/pushbutton to select the PSWD menu item.
  • Page 16: Input Asi & Output Asi Error Reset

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver To configure Input Channel Bandwidth from the CTRL menu, use the toggle switch/pushbutton to select the PSWD menu item and then choose the IN1 or IN2 menu item, followed by MAXB menu item.
  • Page 17: Setting The Output Mode

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 4.2.1.3. Setting the Output Mode This parameter allows the user to set output on loss to DISC or CONT mode. In continuous mode, the corresponding ASI output will output a valid ASI stream of nulls when an input is not present.
  • Page 18: Displaying Input Asi Status Information

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 4.2.2.1. Displaying Input ASI Status Information This menu item displays information contained in the input DVB-ASI stream. Parameters such as Total TS Bit Rate, Null Packet Bit Rate, Useful Bit Rate, Number of Active PID’s, and Number of Continuity Count Errors can be displayed.
  • Page 19: Displaying The Output Asi Bandwidth Used

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 4.2.2.4. Displaying the Output ASI Bandwidth Used This menu selection displays the combined bandwidths used for the 2 video channels. To display the Total Output Bandwidth Used from the STAT menu, use the toggle switch/pushbutton to select the OASI menu and then choose OPBW, followed by USED.
  • Page 20: Displaying The Ethernet Bandwidth

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 4.2.2.8. Displaying the Ethernet Bandwidth This menu selection displays the current Ethernet Bandwidth allocated. To display the Ethernet Bandwidth from the STAT menu, use the toggle switch/pushbutton to select the ETH menu and then choose BW.
  • Page 21: Displaying The Last Interval Counter

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 4.2.2.10. Displaying the Last Interval Counter This menu selection displays the Last Interval Performance Counts recorded each time the Current Interval counters expire. To display these performance counts from the STAT menu, use the toggle switch/pushbutton to select the DS3 menu item and then choose the LIC menu item.
  • Page 22: 80Asib2-Ds3/E3 Card Configuration

    Clear Counters: Enables the user to clear all counters and reset the timer. Remote Reset: Enables the user to remotely reset the 7780ASIB2-DS3/E3 card module. 5.1.2. Ethernet Control Ethernet Mode: Enables the user to set Manual or Auto Ethernet mode.
  • Page 23: Errored Second Control

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 5.2. ERRORED SECOND CONTROL The Errored Second Control tab, as illustrated in Figure 5-2, enables the user to clear the 15-minute counter and the 24-hour counter. Figure 5-2: Errored Second Control Tab Page - 19 Revision 2.0...
  • Page 24: Errored Second Status

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 5.3. ERRORED SECOND STATUS The Errored Second Status tab, as illustrated in Figure 5-3, monitors the current 15 minute and current 24 hour performance counters as well as the last 15 minute and last 24 hour performance counters. The counters include Out of Frame, Signal Loss, Alarm Indication Signal, Severely Errored Frame, Remote Alarm Indication, and DS3 Idle Signal.
  • Page 25: Asi Bandwidth Monitor

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 5.4. ASI BANDWIDTH MONITOR This tab indicates the sum of the two input channel bandwidths (Input Used Data Bitrate). It also indicates the combined bandwidths used for the 2 video channels (Output Used Data Bitrate).
  • Page 26: Control

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 5.5.1. Control Reset Measurement: Enables the user to reset Input Continuity Error Counter to 0. ASI Enable: Allows the user to enable or disable ASI Input channel. Max Input Bandwidth: Enables the user to set the Maximum Input Bandwidth (Mb/s).
  • Page 27: Asi Faults

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 5.7. ASI FAULTS The ASI Faults tab, as illustrated in Figure 5-7, allows the user to enable or disable ASI traps and view trap status. To enable a particular trap, simply click the box located beside each trap so that a check-mark appears.
  • Page 28: Faults

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 5.8. FAULTS The Faults tab, as illustrated in Figure 5-8, allows the user to enable or disable traps and view trap status. To enable a particular trap, simply click the box located beside each trap so that a check-mark appears.
  • Page 29: Jumpers

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver JUMPERS Several jumpers, located at the front of the module are used to preset various operating modes. Figure 6-1 shows the locations of the jumpers on the board. FRAME...
  • Page 30: Configuring The Module For Firmware Upgrades

    7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 6.2. CONFIGURING THE MODULE FOR FIRMWARE UPGRADES The 7780ASIB2-DS3/E3 card can be configured for firmware upgrades using the UPGRADE jumpers or with the serial port ‘u’ command as described below. 6.2.1. Using the Upgrade Jumper...
  • Page 31: Vistalink Remote Monitoring/Control

    Agent. ® 3. The 7780ASIB2-DS3/E3 card also includes an onboard mini agent that can be accessed through the CONTROL port on the rear plate of the card. Connecting this CONTROL port to the management network will allow the unit to communicate without a 7700FC frame controller.
  • Page 32: Configuring The Ip Address (If The Onboard Mini Agent Is Used)

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 7.2. CONFIGURING THE IP ADDRESS (IF THE ONBOARD MINI AGENT IS USED) 1. Connect the upgrade cable to the 4-pin serial port header on the card. 2. Press <ENTER> to display the card’s main menu. Make a selection by typing in the selection number at the ‘>’...
  • Page 33 7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 7. Type ‘X’ and <ENTER> to exit 8. Type ‘S’ and <ENTER> to save the changes Please Note: VLPro traps will be added in the next release when using only the SNMP mini agent.
  • Page 34: Vistalink

    7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 7.3. VISTALINK MONITORED PARAMETERS ® The following parameters can be remotely monitored through the VistaLINK interface. ® Parameter Description Card Type Identifies the type of card. TDMD Status Indicates TDMD Status.
  • Page 35: Vistalink Controlled Parameters

    Clear Counters Allows the user to clear all error counters and reset the timer. Remote Reset Allows the user to remotely reset the 7780ASIB2-DS3/E3 card module. Ethernet Mode Allows the user to set Manual or Auto Ethernet mode. Reset Continuity Allows the user to reset Input and Output Continuity Error Counter to 0.
  • Page 36 7700 MultiFrame Manual 7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver This page left intentionally blank Page - 32 Revision 2.0...

Table of Contents