Channel Selection; Scanning Channels - Advent HT3061A Instruction Manual

Channel Selection

2
Direct
channel
5
selector
8
CH
MENU
AV
MUTE
SLP
CH
STEREO
SCAN PIC
FREEZE ZOOM
SOUND
FAVO
DSP DEMO
VCD/HIFI/DVD
SET
VCR Cable/SAT TV
17
Before you select a channel, please select TV or Cable input signal. Please
see the Tuning section to set the TV/Cable input.
When you select TV, only channels received on antenna can be selected;
When you select Cable, channels received on cable can be selected.
1
Use Direct Channel Selector (0-9 and --- )
To select one-digit channel:
Press one of the 0-9 digit keys and wait for 2 seconds.
To select two-digit channel:
Input the channel using the digit keys. Be sure to enter the
channel within 2 seconds.
To select three-digit channel:
Press "---" to display "1--".
Press two digit keys to input the remaining two digits of the
channel. For example, to select channel 124, press "---", press 2,
3
then press 4.
2
Use CH+ or CH- button
Press CH+, the channel number increases;
2
Press CH-, the channel number decreases.
3
Previous channel
SCAN
Press this button to switch between the current channel and the
previous channel.

Scanning channels

Press the SCAN button, the TV set
scans all channels one by one.
Every channel will be displayed for 2
seconds.
This function helps you to quickly
browse all active programs. Press any
button can stop Channel Scanning.
(Available in "Cable" mode only)
button
Channel Scanning