Silvercrest SKE 3.6 A1 Operating Instructions Manual page 56

Cleaning and Care
GB
IE
TROUBLESHOOTING
Corkscrew does not function
Corkscrew does not function despite charging
Other malfunctions
54
WARNING - RISK OF INJURY
UNDER NO CIRCUMSTANCES should you clean the corkscrew and
charger 8 by placing them in, or holding them under, water! Otherwise,
there is the risk of receiving an electric shock!
■ Clean the housing of the corkscrew and charger
only with a slightly moist cloth. In case of stubborn stains, pour a few drops of
a mild detergent on the damp cloth. Ensure that no liquids can permeate into
the corkscrew/the charger 8 when it is being cleaned!
■ Probably, the corkscrew needs to be recharged. Place the corkscrew in to the
charging station 8. This is explained in the section "Charging".
■ Check that you have positioned the corkscrew correctly in the charger
When the corkscrew is correctly positioned in the charger 8, the blue LED
"Charging" 5 glows.
■ If the malfunctioning continues:
– Check that the charge supply device
correctly inserted in the mains power socket.
– Check that the mains power socket in which the power adapter
the charging station 8 is inserted is supplying power. Connect a known
working appliance to the power socket.
– Check that the barrel plug
charging station 8.
■ If you cannot eliminate the malfunction with the aforementioned methods, or
any other problems arise with your electric corkscrew, please contact our Serv-
ice Partner in your locality.
8, as well as the foil cutter 7,
6 to the charging station 8 is
4 is correctly inserted into the socket of the
8.
6 for
Electric Corkscrew