Download Print this page

Sharp FP-J50J Operation Manual page 5

Hide thumbs Also See for FP-J50J:

Advertisement

CAUTIONS CONCERNING
OPERATION
• Do not block the air inlet or air outlet.
• Do not place the main unit near or on
hot objects, such as stoves or heaters,
or where it may come into contact with
steam.
• Always operate the main unit in an
upright position.
• Do not move the main unit when it is in
operation.
• When moving the main unit, use the
handle on the back of the main unit.
• If the main unit is on easily damaged
flooring, an uneven surface, or thick-piled
carpet, lift it up when moving.
• Do not operate the main unit without the
filters properly installed.
• Do not wash and reuse the HEPA filter
and the Deodorizing filter.
Doing so will not improve filter
performance and can also cause electric
shock or operating malfunctions.
• Clean the exterior with a soft cloth only.
Do not use volatile fluids or detergents.
The main unit surface may be damaged
or cracked with Benzine, paint thinner or
polishing powder. In addition, the sensors
may malfunction as a result.
• Do not scrub the Back Panel hard during
its maintenance.
FP-J50J_2nd.indd
FP-J50J_2nd.indd
3
3
INSTALLATION GUIDELINES
• Avoid locations where the sensors are
exposed to direct wind.
Doing so can cause the main unit to
malfunction.
• Avoid locations where furniture, fabrics,
or other objects can come in contact with
the main unit and interfere with the intake
and outtake of air.
• Avoid locations where the main unit
is exposed to condensation or drastic
changes in temperature. Appropriate
room temperature is between 0 – 35 ºC.
• Place the main unit on a level and stable
surface with sufficient air circulation.
When placed on heavy carpet, the main
unit may vibrate slightly.
• Avoid locations that generate grease or
oily smoke.
Doing so can cause the main unit
exterior to crack and the sensors to
malfunction.
• The dust collecting ability of the main
unit is effective even when the main unit
is as close to 3 cm from the wall,the
surrounding walls and floor may get dirty.
Please place the main unit at a distance
from the wall.
The wall directly behind the air outlet
may become dirty over time. When using
the main unit for an extended period of
time at the same location, periodically
clean the walls adjacent to it.
FILTER GUIDELINES
• Follow the instructions in this manual for
proper filter care and maintenance.
(Page 4)
3
2022/04/22
2022/04/22
11:01:13
11:01:13

Advertisement

loading