Table of Contents
Advertisement
11 Drawers
11.1 Removing the
Larger models
5 and 12 Cu. Ft. models
Thermo Fisher Scientific
Drawers
To remove the drawers in 23 ft
steps (refer to Figure 4):
1. Pull the drawer toward you until the slides are fully extended.
2. Lift the back of the drawer to disengage the mounting tabs from the
slots on the slides.
Note : The drawers fit snugly between the slides. Push the back of the
drawer from underneath to remove the drawer.
3. Raise the back of the drawer almost to a vertical position and disengage
the front mounting clips from the slides.
To remove the drawers on 5 and 12 cu.ft. models, depress the hooks located
on both sides of the drawers (about 1/3 of the way back) and slide the
drawers up and out.
Figure 4. Drawer Removal (Upright Models)
3
and larger models, complete the following
Tabs
Drawer slide
Slot
Laboratory and Plasma Freezers 19
Drawers
Advertisement
Table of Contents
