Advertisement
3. CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type recommendenced by the manufacturer.
Dispose of used batteries according to the manufacture's Instructions.
4. BATTERY
4.1. Battery Installation
1. Insert the batteries negative (-) terminal first.
2. Close the battery cover.
Note:
- Use only rechargeable P03P (Ni-MH)/P03H (Ni-Cd) batteries.
4.2. Battery Charge
Place the handset on the base unit for about 7 hours before initial use.
When the batteries are fully charged,
flashes. When charging, the battery icon is
shown as follows.
5
Advertisement
