Ryobi RPH361800 Manual page 9

1
Insert the battery pack until it snaps
into place.
NOTE: The product has 4 battery ports,
but can function even if only one battery
pack is installed.
NOTE: The LCD panel turns on, and
the USB charging ports and LED task
light can be used.
3
2s
2s
2s
To turn off the product, press and hold
the main power button for 2 seconds.
Insert additional battery packs as
needed. The more battery packs
installed, the greater the amount of
power or run time the product can
provide.
NOTE: For charging USB-C specific
devices or other devices with up to 3
A, connect these devices to the USB-C
ports. The charging ports provide
power only; they do not provide any
communication capabilities.
2
2s
Press and hold the power button for 2
seconds to turn on the product.
NOTE:
The main power
illuminates when power to the product
is on.
NOTE: For charging MP3 players,
tablets, and other devices with up to 2.1
A, connect these devices to the USB-A
ports. The charging ports provide
power only; they do not provide any
communication capabilities.
Getting started
button
3
9