Charging The Product - Ryobi RPH361800 Manual

CHARGING THE PRODUCT

1. Insert the battery pack until it snaps into
place.
2. Connect the charger to the charger input
jack.
3. Connect the charger to an AC outlet to
charge the product.
NOTE: The LCD screen displays the charging
status. Only one battery pack is charged
at one time. The active battery bar flashes
to indicate which battery pack is charging.
There is no power output (AC and USB)
while the product is charging. Disconnect
the charger after the battery packs are fully
charged to operate the product.
12
Operation
1
2
3