Table of Contents
Advertisement
CONNECTING
TWO
INVERTERS
WARNING: The product must not be
connected to other power sources except
with another power hub inverter with the
same model using the parallel kit cable.
1. Turn off the product, and remove the
battery pack.
2. Connect the one end of the parallel kit
cable to parallel kit terminals of a power
hub inverter. Connect the other end of
the cable to the paralled kit terminals of
another power hub inverter of the same
model.
3. Press and hold the power button for 2
seconds to turn on the product.
NOTE: The parallel kit cable links two power
inverters to increas output. Do not disconnect
the cable while the product is running. The
product or the load may be damaged.
1
2
POWER
3
2s
2s
2s
2s
13
Operation
Advertisement
Table of Contents
