Porter-Cable 557 Instruction Manual page 10

900016 - 10-31-01.qxd
A
Fig. 10
8. Continue to hold spindle lock button while using the hex wrench
(furnished with tool), to tighten blade retaining bolt securely, (by rotating
clockwise).
9. Rotate the "quick set" depth adjusting turret (A) Fig. 12, to the "FF"
position.
10. Lift safety lever (A) Fig. 13, fully retract the plunge mechanism, and
reposition the safety lever as shown in Fig. 14. Slowly release pressure on
plunge mechanism.
A
2/12/02 2:38 PM Page 10
A
Fig. 12
Fig. 13
10
B
Fig. 11
A
Fig. 14