Related Manuals for Meltem M-WRG-K
Summary of Contents for Meltem M-WRG-K
- Page 1 M-WRG-K User manual HOME VENTILATION WITH HEAT RECOVERY Ventilation Unit M-WRG-K (Comfort model) Order Nr. 5302-01 03/2011 Meltem Wärmerückgewinnung GmbH & Co.KG Am Hartholz 4 D-82239 Alling info@meltem.com www.meltem.com...
- Page 2 Meltem should be used. Otherwise this may void • The M-WRG ventilation unit may only be operated the warranty and Meltem will not be liable for any once installed correctly. damages. •...
-
Page 3: Table Of Contents
1. You have made the right choice! ......................... - 5 - 1.1 Safety and security ............................- 5 - 1.2 How does the M-WRG-K ventilation unit work? ....................- 6 - 1.3 M-WRG-K ventilation unit overview ........................- 7 - 2. - Page 4 M-WRG-K User manual 4. Cleaning the M-WRG-K ventilation unit ....................- 17 - 5. Filter replacement ............................. - 18 - 5.1 Filter selection ..............................- 18 - 5.2 Replace filters ..............................- 18 - 5.2.1 Remove unit cover ............................ - 18 - 5.2.2 Remove old filters .............................
-
Page 5: You Have Made The Right Choice
M-WRG-K ventilation unit. • Do not install the M-WRG-K ventilation unit into the interior of a cabinet or other furniture. Do not cover the M-WRG-K ventilation unit with any type of fabric (towel, curtains, etc.) or any other objects (furniture, blinds, etc.). -
Page 6: How Does The M-Wrg-K Ventilation Unit Work
M-WRG-K User manual 1.2 How does the M-WRG-K ventilation unit work? The heat exchanger core uses the heat of the while the airstreams are never combined. The cooled outgoing warm stale air to temper the fresh inflowing stale air is led out and the pre-tempered fresh air then air. -
Page 7: M-Wrg-K Ventilation Unit Overview
M-WRG-K User manual 1.3 M-WRG-K ventilation unit overview Casing Cover Dual switch Power switch ON/OFF 3-level ventilation rate switch Supply Air Outlet Stale Air Intake Ring Cover for Stale Air Filter Cover for Supply Air Filter Facade Cover: Ventilation Hood... -
Page 8: Start Up And Operation
The interior and exterior intakes and outlets must not be covered or obstructed. 2.1 Start up Turn on the M-WRG-K ventilation unit by switching the Power ON/OFF switch on the left bottom side of the unit to ON. -
Page 9: Operation Without Remote Control
2.3 Operation with remote control Activate the remote control The M-WRG-K ventilation unit is operated and controled via remote control If the M-WRG-K unit is operated for the first time, please wait 1 minute before activating the remote Insert batteries: control! •... -
Page 10: Operation And Settings
German measured by sensores in the M-WRG-K ventilation unit. These measurements can only be displayed English while the M-WRG-K ventilation unit is running. The Italian ventilation rate “VS” is the most important setting. Estonian You may select one of the following settings:... -
Page 11: Program Overview
Select a ventilation rate (VS) via the 3-level program. If you reseelct the program P1 the saved ventilation rate switch on the left exterior side of ventilation rate will be operated. the M-WRG-K ventilation unit. 21° C 10° C VS: 01 cont. -
Page 12: Interval Program P2
M-WRG-K User manual • Press the “M” button to save your settings and to return to the current operating program display 3.3.3 Interval program P2 3.3.4 Day-/Week program P3 The program P2 lets you ventilate your home in The program P3 lets you adjust the ventilation intervals. -
Page 13: Humidity Program P4
Press the “UP” button to be able to change the duration of the interval. With the “+” or “-“ button The sensors of the M-WRG-K ventilation unit will enter your preferred interval duration (timeline) automatically measure all needed values. Once all... -
Page 14: Temperature Program P5
If the temperature exceeds above drops below defined temperature range, the M-WRG-K ventilation unit will automatically switch to standby mode. Start program: Change Settings: • • Press the “OK” button for the program selection Press the “M”... -
Page 15: Air Quality Program P6
M-WRG-K User manual Start Program: 3.3.7 Air quality program P6 This program is an extra that can be added. • Press the “OK” button for the program selection 3.3.8 Ventilation program P7 menu (Cross ventilation with 2 units) • Select program P7 by pressing the “+” or “-“... -
Page 16: General Settings P8
10 power shortage or to switch to daylight saving time. minutes at the highest ventilation rate (III), in order to avoid any condensate buildup inside the M-WRG-K • Press the “OK” button for the program selection ventilation unit. -
Page 17: Close Air Flaps
The air flaps close automatically during the pause ventilation unit interval. This will further reduce noise from the exterior. The M-WRG-K ventilation unit is made of high quality synthetic material and only needs little cleaning. Start Program: From time to time we recommend cleaning the surface of the unit with a damp cloth. -
Page 18: Filter Replacement
User manual 5. Filter replacement The clogging of the filters is monitored automatically Caution by the M-WRG-K ventilation unit. In case the filters • need to be replaced, an acoustic signal will inform Always turn the M-WRG-K ventilation unit off before you open you, 2–3 weeks prior to the replacement. -
Page 19: Remove Old Filters
• Rotate the cover downwards • Carefully push the cover closed on the bottom edge until the hooks on each side snap into place. • Turn the M-WRG-K ventilation unit back on with the power switch - 19 -... -
Page 20: Trouble Shooting
Air flaps do not open once the If the M-WRG-K ventilation unit The M-WRG-K ventilation unit M-WRG-K ventilation unit is is not operated for a longer should be switched ON and OFF... -
Page 21: Program Overview
M-WRG-K User manual 7. Program overview Program selection menu Remote control buttons Vers. A034.05.02 On/Off Heat recovery Change settings Down Settings menu Ca. 10 sec. and save Start program Previous program Ready to operate Programm Next program Current operating program display... -
Page 22: Technical Data
M-WRG-K User manual 8. Technical data Technical Data M-WRG Ventilation Unit Ventilation air volume (m 15/30/60** Fan speed 3 Levels Heat exchange core aluminum plate cross-flow heat exchanger Heat recovery rate (%) Air Leakage (%) high efficiency radial fan with long life DC motor Power consumption (W) 3.8 / 5.2 / 12.5...
Need help?
Do you have a question about the M-WRG-K and is the answer not in the manual?
Questions and answers