Table of Contents
Advertisement
C
T
OMMAND
ILLER
IMPORTANT: See Section 4.04 - Driveline, to ensure the driveline is the proper
length.
Fig. 13 - Correct work position of the tiller. A 1 to 2 degree rearward tilt is
acceptable.
DANGER: Tractor-implement combinations can create unstable unions with a
chance of roll-over. If necessary, front weights need to be added to the tractor in
order to maintain balance. Always ensure that the tractor tire pressure is correct
according to the tractor operator's manual.
DANGER: Never allow anyone around the tiller when it is in operation. Engage the
tractor PTO only when the tiller blades are 1.5" to 2" from the ground.
DANGER: Operate the implement only at the speed and direction of rotation
indicated on the machine. Serious damage can result if this is not followed.
O
PERATION
3.08 - Start Up
20
O
'
M
PERATOR
S
ANUAL
ABI A
TTACHMENTS
Advertisement
Table of Contents
