Panasonic WV-CP290 Operating Instructions Manual page 13

2 2
Connect the lens cable to the ALC lens connector of the camera. Connect the lens cable to the ALC lens connector of the camera.
ALC lens connector ALC lens connector
3 3
Secure the camera mount bracket (option) Secure the camera mount bracket (option)
to an installation position, and mount the to an installation position, and mount the
camera on the camera mount bracket. camera on the camera mount bracket.
Important: Important:
• The camera mount bracket shall be mounted • The camera mount bracket shall be mounted
on the foundation part of the construction or a on the foundation part of the construction or a
part with adequate strength. part with adequate strength.
• Recommended screw M6, minimum pull-out • Recommended screw M6, minimum pull-out
strength196 N {44.06 lbf}. strength196 N {44.06 lbf}.
• The other security measures to prevent • The other security measures to prevent
dropping also must be considered when the dropping also must be considered when the
total weight of camera and its lens is above total weight of camera and its lens is above
1 kg {2.2 lbs.} in addition to the fall protection 1 kg {2.2 lbs.} in addition to the fall protection
measure measure functioned functioned
in order to strengthen the fall protection in order to strengthen the fall protection
countermeasure. (The fall protection measure countermeasure. (The fall protection measure
can be functioned through the coaxial cable can be functioned through the coaxial cable
when the total weight is below 1 kg{2.2 lbs.}.) when the total weight is below 1 kg{2.2 lbs.}.)
• When attaching an optional tripod mount • When attaching an optional tripod mount
base on the bottom of the camera, use base on the bottom of the camera, use
the removed screws to attach the tripod the removed screws to attach the tripod
mount base. Use of longer or shorter mount base. Use of longer or shorter
screws may cause drop or damage. screws may cause drop or damage.
Recommended tightening torque: Recommended tightening torque:
0.39 N·m {0.29 lbf·ft} 0.39 N·m {0.29 lbf·ft}
by by coaxial coaxial cable, cable,
1 3 1 3
2 4 2 4
Pin No. Pin No.
Dump Dump
1 1
2 2 Dump Dump
Drive Drive
3 3
Drive Drive
4 4
<Installation sample on a ceiling> <Installation sample on a ceiling>
Screws (locally Screws (locally Screws (locally Screws (locally
procured) procured) procured) procured)
Tripod socket Tripod socket
hole: hole:
1/4-20 UNC 1/4-20 UNC
for tripod for tripod
Camera mount Camera mount
bracket (option) bracket (option)
Tripod mount base Tripod mount base
Mounting screws Mounting screws
13 13