Venta AH902 Operation Manual page 5

SAFET Y PRECAUTIONS
FOR INSTALL ATION / WARNING
∙ Plug the power cord into a wall socket with the power specifications of the product
or higher and use the socket for this appliance only. In addition, do not use an
extension cord.
Sharing a wall socket with other appliances using a multi outlet power strip or
➔
extending the power cord may result in electric shock or fire.
Do not use an electric transformer. It may result in electric shock or fire.
➔
If the voltage/frequency/rated current condition is different, it may cause electric
➔
shock or fire.
FOR INSTALL ATION / WARNING
∙ Do not install this appliance near a heater, inflammable material. Do not install this
appliance in a humid, oily or dusty location, in a location exposed to direct sunlight
and water (rain drops). Do not install this appliance in a location where gas may leak.
Failure to do so may result in electric shock or fire.
➔
FOR INSTALL ATION / CAUTION
∙ The appliance should be installed in a place where the power cord of the product
can be easily pulled out.
Failure to do so may result in electric shock or fire due to electric leakage.
➔
∙ Install your appliance on a level and hard floor that can support its weight.
Failure to do so may result in abnormal vibrations, noise, or problems with the
➔
product.
∙ There should be over 6 in. space around the appliance.
If space for air intake is not enough, humidification and purification capacity may
➔
decrease.
If the appliance is too near wall side, the wall paper may get damaged.
➔
∙ When installing the product, make sure that no heavy objects are on the power cord.
Failure to do so may result in electric shock or fire.
➔
FOR POWER CORD / WARNING
∙ Unplug the product, and then remove foreign substances (dust, moisture, etc.)
of the power plug terminal or power plug connection part with a dry cloth on a
regular basis.
Otherwise, electric shock or fire may occur.
➔
∙ When the product, power plug or power cord is damaged, contact your nearest
service center.
∙ Plug the power plug into the wall
socket firmly. Do not use a damaged power plug, damaged power cord or loose
wall socket.
Failure to do so may result in electric shock or fire.
➔
∙ When unplugging the product, do not pull the power cord. Grip the power plug, and
then pull the power plug.
Otherwise, electric shock or fire may occur.
➔
∙ Do not pull or excessively bend the power cord. Do not twist or tie the power cord.
∙ Do not hook the power line over a metal object, place a heavy object on the power
cord, insert the power line between objects, or push the power cord into the space
behind the appliance.
EN 5