Black & Decker BCSC115 Original Instructions Manual page 9

When cutting stiffer materials such as sheet metal, vinyl,
u
etc, use free hand to either work material up over the unit
or roll material to be discarded out of the way as cutting
progresses. (See Fig. E)
When cutting curves, do not tilt the tool; keep the blades
u
perpendicular to the work piece.
Advance blades into the material without forced effort or
u
unnecessary pressure. A little practice will enable you to
determine what forward pressure gives you the smoothest
cutting.
Proper hand position (Fig. F)
Warning! To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.
Warning! To reduce the risk of serious personal injury,
ALWAYS hold securely in anticipation of a sudden reaction.
Proper hand position requires one hand on the main handle.
Maintenance
Your BLACK+DECKER appliance has been designed
to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper care and regular cleaning.
Regularly clean the appliance using a damp cloth. Do not
u
use any abrasive or solvent-based cleaner. Never let any
liquid get inside the appliance and never immerse any part
of the appliance into liquid.
Accessories
Warning! Since accessories, other than those offered by
BLACK+DECKER, have not been tested with this product,
use of such accessories with this tool could be hazardous. To
reduce the risk of injury, only BLACK+DECKER recommended
accessories should be used with this product. Recommended
accessories for use with your tool are available at extra cost
from your local dealer or authorized service center.
Protecting the environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at www.2helpU.com
Technical data
Voltage
No-load speed
Weight
maximum thickness of sheet metal(s) that can
be cut.
Black & Decker declares that these products described under
The Supply of Machinery (Safety) Regulations, 2008, S.I.
These products conform to the following UK Regulations:
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
For more information, please contact Black & Decker at the
The undersigned is responsible for compilation of the techni-
BCSC115
V 3.6
Black & Decker declares that these products described under
DC
min-1 10000
kg 0.3
These products also comply with directives 2014/30/EU and
mm 0.3
(Original instructions)
Level of sound pressure according to EN 62841:
Sound pressure (L ) 76 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 87 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
3.1 m/s , uncertainty (K) 1.5 m/s
2
Declaration of conformity
The Supply of Machinery (Safety)
Regulations 2008
BCSC115 - Crafting scissors
"technical data" are in compliance with:
2008/1597 (as amended),
EN62841-1:2015; EN62841-2-8:2016+A11:2019.
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
2012/3032 (as amended).
following address or refer to the back of the manual.
cal file and makes this declaration on behalf of
Black & Decker.
Director - Consumer Power Tools
Black and Decker UK, 270 Bath Road, Slough
%
EC declaration of conformity
MACHINERY DIRECTIVE
BCSC115 - Crafting scissors
"technical data" are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-2-8:2016,
2011/65/EU.
ENGLISH
2
Ed Higgins
Berkshire, SL1 4DX
United Kingdom
10/09/2021
9