Operation On The Power Amplifier - Pan Acoustics Mundorf AMT Manual

Hide thumbs Also See for Mundorf AMT:

Table of Contents

Step 4:

Fix the connection terminal to the loudspeaker.

NOTICE

The 5-pin connector on the loudspeaker is connected such that the signal can be looped on to an-

other loudspeaker via pin 3 and pin 4. To avoid damage to the connected power amplifi er, the total

impedance of all connected loudspeakers in a line must not fall below the impedance of the amplifi er.

8.2.2. Operation on the power amplifi er

The loudspeaker P 12-AMT must be operated on a correctly confi gured DSP amplifi er or amplifi er with

upstream audio DSP. The amplifi er to be used must be chosen according to the technical data of the

loudspeaker.

Technical data --> see chapter 17 "Technical data loudspeaker".

DSP settings for various DSP amplifi ers and DSP audio platforms for sound equalisation can be down-

loaded from the Pan Acoustics website www.pan-acoustics.de. If you have any technical questions,

you can also contact our support team at support@pan-acoustics.de.

V 1.0

Manual

Page 10 of 16

Table of Contents

Mundorf p 12-amt