Mounting The Yachtsense ™ Link - Raymarine YachtSense Link Installation & Operation Instructions

4.6 Mounting the YachtSense ™ Link
Follow the instructions below to mount the YachtSense ™ Link.
Before mounting the product ensure that you have:
• selected a suitable location, based on the location requirements found in
this document.
• identified the relevant cable connections and the route that the cables
will take.
Installation
1. Fix the supplied mounting template to the chosen location using masking
or self-adhesive tape.
2. Drill 4 holes as indicated on the template to accept the fixings.
3. Remove the mounting template.
4. Screw the fixings approximately half way into the holes in the mounting
surface.
5. Place the unit over the fixings screws and push down to engage the
keyhole slots.
6. Fully tighten the screws.
31