My Vessel Settings - Garmin ECHOMAP UHD2 5 Series Owner's Manual

My Vessel Settings

NOTE: Some settings and options require additional charts or hardware.
Select MENU > My Vessel.
Transducers: Shows all transducers on the network, allows you to change transducers, and allows you to view
diagnostic information
Temp. Offset: Allows you to set an offset value to compensate for the water temperature reading from a NMEA
0183 water-temperature sensor or a temperature-capable transducer
page 60).
Hull ID Number: Allows you to enter the Hull Identification Number (HIN).The HIN might be permanently affixed
to the upper starboard side of the transom or outboard side.
58
(Selecting the Transducer Type, page 44).
(Setting the Water Temperature Offset,
®
Device Configuration