Table of Contents
Advertisement
Available languages
Available languages
6. Press the AM/FM key (7) to
menu or press the PTT switch (11) to
7. The unit automatically
The default color is
2) KEY BEEP
Some operations such as changing channels, pressure
on keys etc. are confirmed by a beep tone. This function
can be activated or deactivated as follows:
1. Turn off the unit.
2. Turn on the radio while pressing the AM/FM key (7).
displayed.
3. Use s/t key (3) on the unit or UP/DN buttons on the
microphone (3) to
select
4. Press the AM/FM key (7) to validate.
5. Use s/t key (3) on the unit or UP/DN key (3) on the mi-
crophone to activate (On) /
When the function is activated, "
6. Press the AM/FM key (7) to
menu or press the PTT switch (11) to
7. The unit automatically
The default key beep value is ON.
3) ROGER BEEP
The ROGER BEEP sounds when the PTT switch (11) of the
microphone is released in order to let your correspondent
speak. Historically as CB is a "simplex" communication
mode, it is not possible to speak and listen at the same
time (as it is the case with a telephone). "Once the con-
confirm
and
select
another
confirm
and exit.
exits
the menu after 10 seconds.
(Orange).
the
menu.
Deactivate
(OF) the function.
" is displayed.
confirm
select
and
another
confirm
and exit.
exits
the menu after 10 seconds.
versation was over, "Roger" was said in order to indicate
"received" or "message understood". The word "Roger"
has been replaced by a significant beep. That is where
the words "Roger beep" comes from.
1. Turn off the unit.
2. Turn on the radio while pressing the AM/FM key (7).
displayed.
3. Use s/t key (3) on the unit or UP/DN buttons on the
microphone (3) to
4. Press the AM/FM key (7) to validate.
5. Use s/t key (3) on the unit or UP/DN key (3) on the
microphone to
activate
function. When the function is activated, " " is displayed.
is
6. Press the AM/FM key (7) to
menu or press the PTT switch (11) to
7. The unit automatically
*6 tones are available for the ROGER BEEP function.
The default roger beep value is OF.
4) EMG SETTING
Priority channels can be assigned to any channel. To
define
new emergency channel:
1. Turn off the unit.
2. Turn on the radio while pressing the AM/FM key (7).
displayed.
3. Use s/t key (3) on the unit or UP/DN buttons on the
microphone (3) to
played (the "1" blinks).
4a. Press the AM/FM key (7) to
or...
4b. Use s/t key (3) on the unit or UP/DN buttons on the
48
select
the
menu.
(1 to 6*) /
Deactivate
confirm
select
and
confirm
and exit.
exits
the menu after 10 seconds.
select
the
menu.
validate
(the channel blinks)
is
(OF) the
another
is
is dis-
Advertisement
Table of Contents
