Brake Light Switches; Checking The Front And Rear; Brake Pads - Yamaha Tenere 700 2021 Owner's Manual

Periodic maintenance and adjustment
braking performance, which may re-
sult in loss of control and an acci-
dent.
7

Brake light switches

The brake light should come on just
before braking takes effect. The brake
light is activated by switches connect-
ed to the brake lever and brake pedal.
Since the brake light switches are
components of the anti-lock brake sys-
tem, they should only be serviced by a
Yamaha dealer.
7-22
EAU36505

Checking the front and rear

brake pads

The front and rear brake pads must be
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart.
Front brake pads
1. Brake pad wear indicator groove
Each front brake pad is provided with
wear indicator grooves, which allow
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator grooves. If a brake
pad has worn to the point that the wear
EAU22393
EAU22434
1 1