Yamaha Tenere 700 2021 Owner's Manual page 26

Instrument and control functions
and bottom set buttons simultaneously
until the first digit starts flashing. A
short press on the top set button will
increase the number from "0" to "9".
Push the bottom set button to select
the next digit and set it following the
same procedure as the first digit. Push
4
the bottom set button to select the last
digit and follow the same procedure.
Push the bottom set button to confirm
the value.
TIP
 The maximum possible entering
value is 900 km or 600 mi.
 The countdown tripmeter will start
as soon as you begin riding. When
the countdown reaches "0" the
display changes to the countdown
tripmeter "TRIP CD" and flashes
10 times.
 To reset the countdown tripmeter,
select it and while the digits flash,
push the bottom set button until it
is reset.
Fuel reserve tripmeter
If the last segment of the fuel meter
starts flashing, the display automati-
cally changes to the fuel reserve trip-
meter "TRIP F" and starts counting the
distance traveled from that point.
To reset the fuel reserve tripmeter, se-
lect it by pushing the top set button,
and while the digits flash, push the bot-
tom set button until it is reset.
TIP
If you do not reset the fuel reserve trip-
meter manually, it will reset automati-
cally and disappear from the display
after refueling and traveling 5 km (3 mi).
4-8
EAU90731
Instantaneous
display
1
1. Instantaneous fuel consumption display
This display shows the fuel consump-
tion under the current riding condi-
tions. It can be set to either "km/L" or
"L/100 km", or "MPG". To switch the
fuel consumption measurement units,
push the top set button until the mea-
surement units change.
 "km/L": the distance that can be
traveled on 1.0 L of fuel.
 "L/100 km": the amount of fuel
necessary to travel 100 km.
 "MPG": the distance that can be
traveled on 1.0 US.gal of fuel.
EAU90740
fuel consumption