Table of Contents
Advertisement
Configure a XS-2426G-B indoor ONT
Security configuration
Configuring access control
3
Click Save ALG.
4
Configure the following parameters:
Table 8-30 DMZ parameters
Field
WAN connection list
Enable DMZ
DMZ IP Address
5
Click Save DMZ.
E
ND OF STEPS
8.37
Configuring access control
This procedure describes how to configure the access control level (ACL).
Note: ACL takes precedence over the firewall policy.
The trusted network object will be shared for all WAN connections; it is not applied individually
to a WAN connection.
1
Click Security Access Control from the left pane. The Access Control page displays.
Figure 8-35 Access Control page
December 2021
Issue 1
Description
Select a WAN connection from the list.
Click to enable DMZ on the selected WAN connection.
Select Custom Settings and enter the DMZ IP address or select the IP address of a
connected device from the list.
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA
Nokia ONT
125
Advertisement
Table of Contents
Troubleshooting
