Configuring Usb; Table 8-36 Ntp Parameters; Figure 8-40 Usb Page - Nokia XS-2426G-B Product Manual

Configure a XS-2426G-B indoor ONT
Configuring the Application

Configuring USB

Table 8-36 NTP parameters

Field
Enable NTP Service
Current date& time
Primary Time Server
Secondary Time Server
Third Time Server
Interval Time
Time Zone
3
Click Save.
You can click
E
ND OF STEPS
8.43 Configuring USB
You can connect USB storage devices and USB printers to the USB ports of the device. The USB
menu enables you to configure FTP and SFTP for your USB storage devices.
The USB connected devices are shown in overview table on the bottom of the USB page.
1
Click Application USB from the left pane. The USB page displays.

Figure 8-40 USB page

December 2021
Issue 1
Description
Click to enable the NTP service.
Enter the current local date and time.
Select a time server from the list or select Custom settings and enter the address of the time
server.
Select a time server from the list or select Custom settings and enter the address of the time
server.
Select a time server from the list or select Custom settings and enter the address of the time
server.
Enter the interval at which to get the time from the time server, in seconds.
Select the local time zone from the list.
to update the displayed information.
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA
Nokia ONT
131