Scanning; Push Scan - Kyocera MA2001w Operation Manual

6

Scanning

Push Scan

It is easy to scan from the operation panel on the machine. Push Scan performs scanning with the following settings. P0 is
the status of scanning without using the preset program.
Item
Original size
Resolution
Reverse image
Sharpen
Original quality
Scan color
Density
Output name
File format
Destination folder
Note The Program is used to change the settings. Refer to Using Programs on page 6-2.
When using Push Scan, KYOCERA Client Tool must be running on the computer. Refer to Accessing KYOCERA
Client Tool on page 3-36.
1
Press the Function Select key to turn on the Scan Indicators, P0 appears in the display on the operation panel.
2
Place the originals. For details, refer to Loading Originals on page 3-12.
3
To use a program, select the program number (P0 to P3).
Press [+] or [-] to select the program number.
Note For details on functions that are registered in programs, refer to Using Programs on page 6-2.
P0 is the status with no program set.
Value
If unit setting is inch: Letter
If unit setting is mm: A4
For details on unit setting, refer to Configuration on page 3-51.
300 × 300 dpi
Unchecked
Low
Text
Full color
Normal (0)
Scan
PDF
C:\Users\<User >\Documents
6-1