Installing the display back-cover and antenna assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the display back-cover and antenna assembly.
Steps
Place the display back-cover and antenna assembly on a flat surface and perform the postrequisites to install the display
back-cover and antenna assembly.
Next steps
1. Install the
display
cable.
2. Install the
display
hinges.
3. Install the camera.
4. Install the
display
panel.
5. Install the
display
bezel.
6. Install the
display
assembly.
7. Install the
WWAN card
8. Install the
base
cover.
9. Follow the procedure in
Palm-rest assembly
Removing the palm-rest assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
62
Removing and installing components
for systems enabled with 4G LTE.
After working inside your
Before working inside your
computer.
computer.