Shore Power; Outlets - Roadtrek CHASE 2021 Owner's Manual

41

Shore Power

The shore power connection is through the shore power cord, stored in the driver's side large compartment. See Outside your Roadtrek for location.
The switchover from shore power to inverter is automatic.
To connect to external (shore) power, open the side compartment and remove the power cord. Plug the power cord into the campsite 30-amp power
source. Visit the owner's section of our website to read the HOWTO: Shore Power guide on how to connect and disconnect to shore power.
Running certain appliances when plugged into less than 30 amps will result in component damage

Outlets

The outlets are operated from the inverter, generator, or shore power. Further, the outlets are protected by GFCI. The outlets are operated from the
inverter, generator, or shore power. Further, the outlets are protected by GFCI. The GFCI is located above the driver's seat at the distribution panel.
GFCI located on the fuse panel above the driver's seat
Breaker and fuse panel above the driver's seat