Appendix C: Install External Antenna - Ericsson RBS 6402 Installation Manual

5

Appendix C: Install External Antenna

Note
56/1531-LZA 701 6001 Uen D | 2015-11-06
The RBS can be equipped with two to four external cellular antennas.
For single-band deployment the upper two RF module places are
used. For dual-band deployment all four RF module places are used.
Ge7466B
Before removing the covers, discharge any static electricity by
touching the metallic part at the rear of the RBS with ESD protective
gloves.
Use the ESD protective gloves during the whole process when
installing the external antenna.
1. Remove the back cover by first gently inserting the flat end of the
tool (included in the external antenna adapter kit) at a slight angle
along the side, then pulling the cover upward.
Ge7454A
2. Remove the back cover.
Ge7455A
Appendix C: Install External Antenna
21