Advertisement
Install RBS
T20 Torx
1.5 Nm
6. Verify
15 sec
7. Clean Up
12
Fasten the RBS to the mounting bracket, by tightening the screws
to 1.5 Nm.
Ge7017A
Check that the RBS is securely attached.
Ge7449A
Confirm that the green operational indicator is on and that no alarms
are active. A flashing green operational indicator means that the
integration is in progress. It takes about 15 seconds after the cables
have been connected before the operational indicator starts to flash.
If there is an error, redo the autointegration process in step 2. If the
error prevails, refer to Handle Faults On-Site.
Ge7024C
Remove the drilling template.
Ge7018A
56/1531-LZA 701 6001 Uen D | 2015-11-06
Hide quick links:
Advertisement
