Table of Contents
Advertisement
Playback/Deletion
Problem
Shooting information is
not displayed.
Dust or dirt particles
appear in images.
Pixel defects such as
bright spots and dark
spots appear in the
image.
Images are not
displayed on an AV
device.
The images on the
7
memory card cannot be
played back.
The images are not
displayed on the
monitor.
The monitor turned off. The battery is exhausted.
File(s) cannot be
deleted.
The memory card can-
not be formatted.
144
Downloaded from
Cause
Information display is set to [No
Information Display].
The sensor is dirty or dusty.
There are defective pixels in
the sensor.
The cable is not correctly
connected.
The input setting of the AV
device is incorrect.
The inserted memory card is not
formatted with this camera.
The memory card contacts
are dirty.
The card is malfunctioning.
The [Auto Power Off] function
has been activated because the
camera was not operated for a
certain period of time.
[Protect] is set for the image(s). Cancel the protection in [Protect] of
The memory card is locked.
The memory card is locked.
ManualsNet.com
Press j to switch the information
displayed on the screen.
Perform [Dust Removal] in the
E9 menu.
The Dust Removal function can be
activated every time the camera is
turned on and off.
Perform [Pixel Mapping] in the
E9 menu.
It takes about 30 seconds to correct
the defective pixels, so be sure to
install a fully charged battery.
Connect the cable correctly.
Check the AV device settings.
Insert a memory card formatted
using [Format] of the E1 menu in
this camera.
Clean with soft, dry cloth.
There is no problem with the camera
if images in another memory card
can be played back with this camera.
Do not use a memory card that has
a problem.
Charge the battery.
Turn the camera back on.
the C1 menu.
Unlock the card.
Unlock the card.
search engine
Solution
p.20
p.95
p.42
p.38
p.40
p.97
Page
—
—
—
—
—
—
—
Advertisement
Table of Contents
