Connecting To A Communication Device Via Bluetooth - Ricoh GR III Operating Manual

Connecting to a Communication Device via Bluetooth®
1
Install the Image Sync on the communication device.
2
Turn on the Bluetooth® function of the communication device.
3
Select [Bluetooth Setting] in the E6 menu, and press d.
The [Bluetooth Setting] screen appears.
4
Select [Action Mode], and press d.
5
Select [On anytime] or [On when
power is on], and press e.
5
6
Select [Pairing], and press d.
7
Select [Execute Pairing], and press
e.
The camera enters a pairing standby state,
and the camera's [Device Name] and [Pass-
word] are displayed.
8
Start the Image Sync on the communication device, select [GR
IIIx] on the model selection screen, and then tap [Connect over
Bluetooth].
The camera and the communication device are paired.
When the camera is connected to the com-
munication device via Bluetooth®, the icon
indicating the connected status appears.
112
Downloaded from ManualsNet.com
Action Mode
Allows Bluetooth connection
even when the camera
is turned o .
Pairing
Execute Pairing
Paired Devices
search engine
On anytime
On when power is on
Disable
Cancel Cancel
1/400 F5.6 400
OK OK
100