Service And Maintenance; Accessories - Festool TPC 18/4 Original Instructions Manual

English
Signal
Beeps once.
Beeps once.
Beeps twice.
Beeps continuously. -

13 Service and maintenance

WARNING
Risk of injury, electric shock
► Always disconnect the battery pack from
the machine before any cleaning or main­
tenance!
WARNING
Any maintenance or repair work that re­
quires opening of the motor or gear housing
should only be carried out by an authorised
Customer Service Centre (name supplied by
your dealer)!
► Maintenance or repair work carried out by
an unauthorised person can lead to the
wrong connection of the power cord or oth­
er components, which in turn can lead to
accidents with serious consequences.
CAUTION
Certain cleaning agents and solvents are
harmful to plastic parts.
► Some of these include, but are not limited
to: Gasoline, Acetone, Methyl Ethyl Ketone
(MEK), Carbonyl Chloride, cleaning solu­
tions containing Chlorine, Ammonia, and
household cleaners containing Ammonia.
Customer service and repairs must
only be carried out by the manufac­
turer or service workshops. Find the
nearest address at:
www.festoolusa.com/service
16
LED light
-
Flashes continuously. Kickback stop triggered.
-
Cause
Battery pack empty/incom­
patible.
Power tool overloaded.
When pressing the on/off
switch: Power tool has over­
heated.
Preset torque reached.
The power tool is faulty.
Always use original Festool spare
EKAT
4
parts. Order no. at:
www.festoolusa.com/service
5
3
2
1
To ensure constant air circulation, always keep
the cooling air openings in the motor housing
clean and free of blockages.
Keep the contacts on the power tool, charger
and battery pack clean.
Check all warnings on the electric power tool
for readability and completeness. Replace
missing or illegible warnings.

14 Accessories

Use only original Festool accessories and
Festool consumable material intended for this
machine. These components are designed spe­
cifically for this machine. Using accessories
and consumable material from other suppliers
will most likely affect the quality of your results
and limit warranty claims. Machine wear or
your own personal workload may increase de­
pending on the application. Protect yourself and
your machine, and preserve your warranty
claims by always using original Festool acces­
sories and Festool consumable material!
The order numbers of the accessories and tools
can be found in the Festool catalogue or on the
Internet under "www.festoolusa.com".
14.1 SYSTAINER
Systainer
Many Festool products are shipped in a unique
system container, called "Systainer". This pro­
vides protection and storage for the tool and ac­
cessories. The Systainers are stackable and
Action
Charge/change the battery
pack.
Reduce the load on the pow­
er tool.
Once it has cooled down, re­
start the power tool.
See section 11.1.
-
Contact the manufacturer to
rectify the fault.